We offer Analog and Digital earth Resistance meters. Resolutions well below 0.01 Ohm are very popular Earth Resistance Meters meeting the International Standards.

We promote the clamp meters which are the leakage detectors too. The leakage detectors ranging from 20 mA and above are available from us. Clamp Meter of 400 A, 600 A 1000A Leakage detector in the electric equipment, Electric Circuit are offered from us.

1 kV to 77 kV contact / non contact detector

High Frequency Discharges coming out of HID lamps are possible to detect using our products the voltage up to 70 kV of high frequency in nature are detected by our probes and testing done by the generators. The corona detectors to check the inductance of the On line oat

4 wire kelvin clip Micro Ohm meter has the resolution down to 1 micro Ohm, Best current of 1 A best protections in the class, rugged, Micro processor controlled, over current, over temperature protection.

Kelvin clip, high accuracy of 0.5% is established in 100 mA, the best resolution of 0.1 mOhm meter. Over temperature protection, advert current protection,

This instrument is useful for fault-finding or commissioning of electrical installations. Differentiation between the Line (hot), Neutral and Earth (ground) path by reading their values has never been so easy. Bad contacts, old wiring or bad earth path are quickly identified. Faulty electrical network can be resolved in a fraction of the time normally required using conventional equipment.

Its sensor senses the radiated field which surrounds live conductors. Radiated field strength increases with voltage and decreases quickly with distance or earth shielding. The radiated field from a cable of closely bunched conductors supplied by three phase power tends to cancel (See "Limitations of use" paragraph). Detecting distance of a 250Vac single live wire is approximately 10cm. With a bunched neutral and earth cable, as in a flexible cable, the distance is reduced to 5cm.

The NEW PC range of Multifunction Phasing Sticks utilizes a long established technique to detect and measure High Voltages and perform phasing tests. These Dual Poles instruments incorporates modern, high quality glass fiber front end, composite polyurethane main body molding to give tough and very light weight construction and superior safety features. They have Analog Color Coded Dual Scales and Neon indication.